AMERITRON ARB-704 INTERFACCIA RADIO AMPLIFICATORE LINEARE UNIVERSALE

Codice Prodotto: AMEARB704

Disponibilità: In magazzino

Prezzo: € 77,00
ARB-704

 

AMP TO XCVR INTERFACE, FOR ALL XCVR

 

  • Keys nearly any PA
  • Useable with nearly any transceiver
  • Noiseless operation, transistor keying
  • Fast, QSK capable
  • Simple wiring

Every transceiver has a keying output for an amplifier - but not all those outputs are capable of keying the high voltages or currents of an amplifier. High voltages or voltage peaks can destroy the keying stage of the transceiver. To prevent this an additional buffer relay like the ARB-704 is used.

The Ameritron ARB-704 is a semiconductor keying buffer to control the PTT line of nearly any amplifier. It handles voltages up to 200V and currents up to 300mA. This covers nearly all power amplifiers available on the market today. The idle voltage of the amp can be either positive or begative or even AC. The keying buffer keys against ground, works absolutely without noise and is fast enough to handle QSK keying without changing the shape of the key pulse.

The input can be configured by internal jumpers for various voltage levels, either positive or negative. This makes the ARB-704 useable with nearly any transceiver. The input current is below 1mA. Even very sensitive keying outputs liket those of the IC-706 can be handled.

The wiring and setup of the ARB-704 is very simple. The device has both, RCA (Cinch) sockets and a 5pin DIN socket for ready-made cables (see below). The RCA sockets are used with standard RCA cable for PTT from TRx to ARB-704 and on to the amplifier. If ALC is used this connections bypasses the ARB-704, TRx and PA are connected directly on the ALC line.

Optionally WiMo offers ready-made cables for many transceivers. These cables use in most cases the ACC sockets on the rear of the radio. The ARB-704 must be supplied with 9 to 18V DC power, a separate DC cable is supplied. Some ready-made cables take the power directly from the transceiver.

Technical Data ARB-704
   
Max. Switching Voltage ± 200V= or 200Vpp
Max. Switching Current 300mA
Max. Current intake of PTT Input < 1mA
Connector AMP (to PA) RCA female(Cinch), keying against ground
Connector Radio (from TRx) RCA female (Cinch)
Connector ALC (from PA) RCA female (Cinch), used only with ready-made cables
Connector 5pin DIN for ready-made cables, connects power, ground, PTT from TRx, ALC to TRx
Operating Voltage 9 — 18V=
Power Requirement approx. 50mA
Display 1 LED

Scrivi una recensione

Nota: Il codice HTML non è tradotto!

Punteggio: Negativo Positivo

Inserisci il codice nel box di seguito:

iscriviti alla newsletter